contact test

英 [ˈkɒntækt test] 美 [ˈkɑːntækt test]

网络  接触测试; 连接测试

化学



双语例句

  1. By means of contact test with a reference electrode underground, we measured the distribution of casing protection potential along vertical depth.
    采用地下参比电极“接触测试”法,对套管实施保护后的纵向深度套管保护电位进行定量测试。
  2. Automobile Relay contact Electroerosion Test conditions;
    汽车;继电器触点;电侵蚀;试验条件;
  3. This article has focused on study of this kind of coatings by use of field exposure or accelerated weathering, as well as the FT-IR, DSC, SEM and contact angle test.
    通过户外老化与人工候加速老化等方法,并结合FT&IR、DSC、SEM、表面接触角等表征技术对这类涂料进行研究。
  4. Objective To compare efficacy difference of long-lasting insecticidal nets by forced tarsal contact test and standard WHO cones test.
    目的比较经强迫接触法和接触筒法同时检测长效蚊帐的结果差异。
  5. The contact sensor test and the earth sample physical mechanics test before and after the blasting indicate that the ground layer intensity has increased and the bearing capacity has also increased by 20%.
    由爆炸前后触探试验和土样物理力学性质实验对比,爆炸后土层强度指标有所提高,承载力提高20%,压缩模量提高了20%。
  6. The Development of Contact Five-Wheel Test Instrument
    接触式五轮仪检测机的研究
  7. Rolling contact fatigue test and wear test are mainly carried out besides the conventional mechanical performance tests for materials above.
    对上述试验材料除进行常规力学性能试验外,主要进行了滚动接触疲劳试验和磨损试验。
  8. In application of precision locating contact resistance test system, it had achieved satisfactory results.
    在精密定位接触电阻测试系统的应用中取得了满意的结果。
  9. The results of salt spray test and contact corrosion test further approved the same conclusion.
    从盐雾试验和接触腐蚀试验结果进一步证实这一结论:注入试样比非注入试样在抗蚀性方面提高很大。
  10. It has been testified that the system not only improves the accuracy of supporting pole number test but also enhances the level of automation and intelligence of the overhead contact system test coach.
    实践证明本系统不但可以提高杆位测试精度,而且可以接触网检测车的自动化和智能化程度。
  11. Control Program Design of the Contact Resistance Test System Based on Delphi
    基于Delphi接触电阻测试系统控制程序的设计
  12. Contact angle test indicated that the surface characteristics would contribute a good preliminary adhesion between asphalt and aggregate.
    沥青在集料表面的接触角试验验证集料表面构造与沥青在集料表面初始粘附性好坏的关系。
  13. A study on the method of contact fatigue test for deep Carburized Materials of gears
    深层渗碳齿轮材料接触疲劳试验方法的研究
  14. The contact angle test demonstrated the copolymers were more hydrophilic than pure PLA;
    表面接触角测试验证了共聚物具有较好的亲水性;热分析测试表明,共聚物具有良好的热稳定性;
  15. Stress Analysis of the Samples Acted by Frictional in Contact Fatigue Test
    摩擦力作用下的接触疲劳试样的应力分析
  16. The tray agglutination test and the sperm-cervical mucus contact test were used to detect the antisperm antibodies in sera and genital tract secretions from 34 couples with infertility of unknown origin.
    本文应用浅盘凝集试验和精子宫颈粘液接触试验分别检测34对不明原因不育夫妇血清和生殖道局部分泌物中抗精子抗体的发生率。
  17. Approach on the contact resistance test method for interference fit
    过盈配合接触电阻测试法的探讨
  18. The Control Program Design of Fretting Contact Resistance Test Machine
    微动接触电阻测试仪控制程序设计
  19. Through the contact test on-the-spot, we have tested the application of the bracelet anode casing quantitatively on-the-spot and discovered that the bracelet anode can reduce the rate of casing corrosion in the soil.
    采用现场接触测试法,测试了手镯式阳极套管在现场的应用情况,并验证了手镯式阳极套管室内实验结论的正确性。
  20. The fretting subsystem and the contact resistance test subsystem were introduced, and the scheme of the control program design was given.
    文章介绍了该装置的微动控制系统和接触电阻测试系统,给出了该仪器的控制、测试和数据处理的软件设计方案。
  21. The fretting contact resistance test machine is a dynamic test system to measure contact resistance during the fretting progress in contact pairs.
    微动接触电阻测试仪是用于微动过程中接触对电阻动态测试的装置。
  22. Aiming at the shortage of contact test in tradition ATS, a PCB fault diagnosis method based on infrared thermal imaging technology is put forward.
    针对传统自动测试系统中接触测试的不足,提出了一种基于红外热成像技术的印制电路板故障诊断方法。
  23. By the contact angle test, the membrane showed the transference between hydrophobic and hydrophilic static along with temperature changed.
    利用接触角的测定证明了共聚膜在温度变化时出现的亲水&疏水转变。
  24. Based on the test device and test the actual needs, it describe the test system from four parts, as contact resistance test, operating and recovery test, insulation resistance and voltage test, reliability test.
    根据对试验装置以及检测项目的实际需要,本文将整个试验系统分为四个部分进行描述,四个部分分别为接触电阻试验、操动和恢复试验、绝缘电阻和耐压试验、可靠性试验。
  25. By the end of the alginate/ PVA and derivatives/ PVA fiber in water was observed and the contact angle test showed that sodium alginate derivatives, electrospun nanofibers were electrospun fiber hydrophobic alginate got bigger promotion.
    最后通过对海藻酸钠/PVA及海藻酸钠衍生物/PVA纤维浸入水中观察和接触角测试表明,海藻酸钠衍生物电纺纳米纤维疏水性较海藻酸钠电纺纤维得到了较大提升。
  26. The wear characteristics and current-carrying characteristics between immersed copper carbon pantograph slide and copper-tin alloy wire are studied, and the mechanism is analyzed by using the sliding electrical contact wear test machine self developed.
    利用自行研制的滑动电接触磨耗实验机,研究了浸铜碳滑板和铜锡合金导线之间的磨耗特性和载流特性,并进行机理分析。
  27. Contact Angle test shows that both CS and PVP is hydrophilic material and proportional control can change its hydrophilicity. Its hydrophilic is better than pure CS membrane.
    接触角测试表明CS与PVP都是亲水性材料,通过两者比例调节可以改变其亲水性,共混膜的亲水性较纯CS薄膜更好。
  28. It is indicated that the tensile stress life model is feasible through rolling contact fatigue test with different stress levels.
    经与不同接触应力水平下的滚动接触疲劳寿命试验结果验证,表明了该拉应力-寿命模型的可行性。